iPhone 15 Pro Max Top Speaker
Before You Begin
Warning
Read Battery Safety and follow workspace and battery handling guidelines before you begin.
Remove the following part before you begin:
Tools
6.7-inch repair tray
ESD-safe tweezers
JCIS bit
Nitrile gloves
Nylon probe (black stick)
Torque driver (teal, 0.75 kgf cm)
![](https://cdsassets.apple.com/live/SZLF0YNV/service-documentation/ssr/iphone-15-pro-max-d84/104925-top-speaker/000_RP2028_TS_Locator_V1_1X.jpg)
Caution
To avoid damaging the lenses, don’t touch the TrueDepth cameras or nearby parts.
Removal
Place the enclosure in the repair tray with the USB-C connector facing the cutout.
Use a torque driver and the JCIS bit to remove two crosshead screws from the top speaker. Set aside the screws.
Use ESD-safe tweezers to lift the top speaker out of the enclosure.
Reassembly
Use ESD-safe tweezers to position the top speaker in the enclosure so that it is flush with the edge of the enclosure.
Caution: Ensure that the top speaker is not tilted or slanted.
Use the teal torque driver and JCIS bit to install one new crosshead screw (923-09802) (1) into the top of the top speaker.
Use the teal torque driver and JCIS bit to install one new crosshead screw (923-10046) (2) into the bottom of the top speaker.
Reinstall the following part to complete reassembly: