Studio Display Power Cord

Before You Begin

Danger

Ensure that the power cord is not plugged into an electrical outlet.

Removal

Important

If a support wedge is inserted between the housing and the stand, remove it.

1. Press the power cord removal tool against the back of the stand. Create just enough clearance between the tool and stand to wrap the power cord around the tool twice.

   • Important: Ensure that the display is tilted completely downward.

   

2. Hold the cord and the power cord removal tool with the same hand. Ensure that the cord is aligned with the port. Use your other hand to hold the stand for stability.

   • Caution: Ensure that the power cord has a direct line for removal to avoid damaging the pins.

   • Important: For the VESA mount adapter, lay the housing flat on the table. Hold down the housing for stability.

3. Rotate the power cord removal tool downward to unplug the power cord.

   

Reassembly

1. Align the notch on the port with the opening on the end of the cord. Then insert the power cord into the port.

   

2. Check that the power cord is flush with the back of the display.