iPad Air 13-inch (M2) Tools
Tools with part numbers are available for purchase from the Self Service Repair Store. Tools without part numbers can be purchased from electronics supply retailers.
923-10417 13-inch display protective cover  | 661-40456 13-inch heated display pocket  | 923-10421 13-inch repair tray1  |
922-7172 Access card  | 923-10420 Adhesive activation roller  | 923-10424 Adhesive cutter  |
Cut-resistant gloves  | ESD mat  | ESD-safe cleaning solution  |
ESD-safe tweezers  | ESD wrist strap with clip or plug  | Ethanol wipes2  |
Fireproof enclosure  | 661-44430 Heated display removal fixture3  | Heat-resistant gloves  |
923-10430 iPad Air 13-inch display adhesive alignment tray  | IPA wipes  | Nitrile or lint-free gloves  |
922-5065 Nylon probe (black stick)  | Painters tape  | Safety glasses with side shields  |
Sand4  | Sand container5  | 923-10414 Support plate  |
923-0248 Torque driver (black, 0.35 kgf cm) kit6  |
1 Each repair tray comes with two suction cups.
2 Ethanol wipes must contain at least 90% ethanol and no additives except isopropyl alcohol.
3 Refer to the Heated Display Removal Fixture operating manual. If you purchased a new heated display removal fixture, refer to the unboxing instructions.
4 Clean, dry, untreated sand (8–10 cups)
5 Sand container (wide-mouthed, quick pour, nonbreakable plastic container with a flip-top lid)
6 The black torque driver kit includes a black torque driver (0.35 kgf cm), Torx security bit (923-0247), and JCIS bit for crosshead screws (923-0246). The bits are also available separately.