About emergency and government alerts on iPhone and Apple Watch

Learn how to turn on emergency, government, and public safety alerts on your iPhone and Apple Watch.

You can receive emergency, government, and public safety alerts on your iPhone and Apple Watch. In the event of an emergency, here's what you might see:

  • Alerts issued by your country or region's government
  • Alerts involving imminent threats to safety or life
  • Alerts for extreme weather conditions
  • AMBER alerts (America's Missing: Broadcast Emergency Response)*
  • Public Safety Alerts*

*AMBER alerts and Public Safety Alerts aren't available in all countries or regions.

Turn Government Alerts on or off

By default, Government Alerts are turned on for your device.1 When you receive a government alert, you hear a special sound that's similar to an alarm. If you want to turn these alerts on or off, follow these steps:

  1. Go to Settings > Notifications.
  2. Scroll to the very bottom of the screen.
  3. Under Government Alerts, turn the type of alert on or off.2

1. Government Alerts are supported when using a SIM card from a supported carrier. Your Apple Watch can receive these alerts if your iPhone can receive them and is nearby, or your Apple Watch is on a Wi-Fi network. With a cellular plan from a supported carrier, your Apple Watch Series 3 (GPS + cellular) or later can receive these alerts without your iPhone nearby. For more information, contact your carrier. 

2. In some countries or regions, you may not be able to disable Government Alerts.

Choose to receive Test Emergency Alerts in the United States

When your iPhone is connected to a carrier in the United States — using a U.S. SIM or while roaming in the U.S. — you can enable Test Emergency Alerts. By default, this is turned off. When you receive this type of alert, you'll hear a sound that's similar to an alarm, and the alert will mention that it's a test.

Government test alerts are available with U.S. carriers, including Puerto Rico. Your local government is responsible for the content and the frequency of the test alerts. You can disable this feature anytime with the following steps. For more information, contact your carrier.

If you're using an iPhone with iOS 15.4 or later or an Apple Watch with cellular with watchOS 8.4 or later

To turn Test Alerts on, follow these steps:

  1. On your iPhone, download the Test Alerts profile:
    Test Alerts profile
  2. Tap Allow. If you're asked to choose the device that you want to install the profile on, choose iPhone or Apple Watch.
  3. Open the Settings app, then tap Profile Downloaded.
  4. Tap Install. Follow the onscreen instructions to finish installing the profile.
  5. After the profile is installed, on your iPhone or Apple Watch, go to Settings > Notifications.
  6. Turn on Test Alerts.

To turn Test Alerts off, either:

  • On your iPhone or Apple Watch, go to Settings > Notifications and turn off Test Alerts.
  • On your iPhone or Apple Watch, go to Settings > General > Device Management and remove the profile.

If you're using an iPhone with iOS 15.3 or earlier

To turn Test Alerts on, follow these steps:

  1. Open the Phone app and tap Keypad.
  2. Enter *5005*25371# and tap the Call button . You'll get an alert that says "Test alerts enabled."

To turn Test Alerts off:

  1. Open the Phone app and tap Keypad.
  2. Enter *5005*25370# and tap the Call button . You'll get an alert that says "Test alerts disabled."

Learn more

Published Date: