iPhone Duo Top Speaker

Before You Begin

Warning

Read Battery Safety and follow workspace and battery handling guidelines before you begin.

Tools

  • Crosshead 44 mm half-moon bit

  • ESD-safe tweezers

  • Nylon probe (black stick)

  • Torque driver (orange, 0.85 kgf cm)

Refer to a full list of tools required for all repairs.

Removal

Note: If you’ve already completed the removal steps, skip to reassembly.

Important

Complete outer display removal steps 1 through 6. Then continue to step 1.

  1. Use a torque driver and crosshead bit to remove three crosshead screws from the top speaker.

    • Remove the top speaker from the enclosure.

Reassembly

Screw location diagram

  1. Position the top speaker into the enclosure by tilting it so the top of the speaker fits into the slot in the enclosure.

  2. Use the orange torque driver and crosshead bit to install three new crosshead screws (923-16035) (L1-L3) into the top speaker.

    • Caution: Do not touch the grounding springs on the top speaker.

Reinstall the following part to complete reassembly:

Published Date: