The Mac Pro (Late 2013) has four memory slots that you can upgrade with up to 64GB of memory using 1866 MHz DDR3 ECC compliant memory DIMMs. To ensure compatibility, Apple recommends that you use Apple-approved memory. You can purchase Apple-approved memory online from the Apple Store or by visiting an Apple Retail store or Apple Authorized Reseller.
When you upgrade the memory in your Mac Pro (Late 2013) it must meet these requirements.
- 1866 MHz DDR3 full length DIMM. Mixing memory speeds is not recommended.
- Error-correcting code (ECC).
- 4GB, 8GB, or 16 GB DIMMs.
- Unbuffered (UDIMM) or Registered (RDIMM). Do not mix UDIMMs and RDIMMs.
- 240 pin DIMM.
- 1.5 or 1.35 volts.
- Use the same size memory modules across all slots to maximize performance.
- DIMMs with heatsinks are not supported and may damage the DIMM mechanism.
Important: All DIMMs must be 1866MHz DDR3 ECC compliant. The Mac Pro supports both unbuffered UDIMMs and registered RDIMMs, but it is important not to mix these two types of memory. Mixing UDIMMs and RDIMMs will result in a memory error tone when you turn on your computer.
|Total Memory||DIMM Slot 1||DIMM Slot 2||DIMM Slot 3||DIMM Slot 4|
|12GB||4GB ECC UDIMM||4GB ECC UDIMM||4GB ECC UDIMM|
|16GB||4GB ECC UDIMM||4GB ECC UDIMM||4GB ECC UDIMM||4GB ECC UDIMM|
|32GB||8GB ECC UDIMM||8GB ECC UDIMM||8GB ECC UDIMM||8GB ECC UDIMM|
|64GB||16GB ECC RDIMM||16GB ECC RDIMM||16GB ECC RDIMM||16GB ECC RDIMM|
Refer to Mac Pro (Late 2013): Installing or replacing memory for step by step memory installation instructions.