iPhone Duo Tools
Tools with part numbers are available for purchase from the Self Service Repair Store. Tools without part numbers can be purchased from electronics supply retailers.
923-15264 5.4-inch back glass protective cover | 923-15265 5.4-inch outer display protective cover | 661-64073 5.4-inch repair tray with shell icon1  |
923-10726 9-volt battery clips  | 923-14190 (APAC and EMEIA) LL923-14190 (All other locations) Adhesive cutter  | 923-09176 Adhesive removal tool  |
661-63304 Adjustable heated display pocket  | 923-02995 Adjustable torque driver (10–34 Ncm)  | 661-65892 Back glass corner press plate2  |
661-65894 Back glass side press plate2  | 923-15975 Back glass sanding cover  | 923-15248 Battery 1 press plate3  |
923-15249 Battery 2 press plate3  | 923-15253 Camera cap  | Compressed air |
923-15977 Cover layer squeegee4  | 923-0246 Crosshead 44 mm half-moon bit  | 923-09177 Crosshead 50 mm bit  |
Cut-resistant gloves  | 661-08916 Display press  | ESD mat  |
ESD-safe cleaning solution  | ESD-safe tweezers  | ESD wrist strap with clip or plug  |
Ethanol wipes5  | 923-15255 FaceTime camera cap  | 661-52833 Heated display removal fixture6  |
Heat-resistant gloves  | 661-64074 Inner display base4  | 077-01158 Inner display fixture kit  |
923-15976 Inner display fixture roller4  | 661-65890 Interposer flex cable support stands   | Isopropyl alcohol (IPA) wipes  |
Microfiber cloth  | Nitrile or lint-free gloves  | 922-5065 Nylon probe (black stick)  |
661-65889 Open repair tray with shell icon  | 661-65891 Outer display corner press plate2  | 661-65893 Outer display side press plate2  |
923-15254 Outer front camera cap  | 923-0247 Pentalobe PL1.1 44 mm half-moon bit  | Safety glasses with side shields  |
Sand7  | Sand container8  | Sanding block  |
Sticky notes (3 by 3 inches)  | 923-02066 Super screw 44 mm half-moon bit  | 923-09962 Super screw 50 mm bit  |
923-0248 Torque driver (black, 0.35 kgf cm) kit9  | 923-0448 Torque driver (blue, 0.65 kgf cm)  | 923-00738 Torque driver (gray, 0.55 kgf cm)  |
923-00105 Torque driver (green, 0.45 kgf cm)  | 923-08131 Torque driver (orange, 0.85 kgf cm)  | 923-08085 Torque driver (teal, 0.75 kgf cm)  |
923-08468 Torx Plus 3IP 44 mm half-moon bit  | 923-01290 Trilobe 44 mm half-moon bit  | USB-C charge cable  |
076-00807 Glue and syringe | 661-64072 Heated inner display pocket  | 923-15243 Inner display alignment tray  |
923-15242 Inner display press plate  | Needle-nose pliers  | Sharp cutting tool |
1 Each repair tray comes with one suction cup.
2 Press plate is only available to order in a kit (077-01166). The kit includes two back glass press plates and two outer display press plates.
3 Press plate is only available to order in a kit (077-01159). The kit includes battery 1 press plate and battery 2 press plate.
4 Tool is only available to order in a kit (077-01158). The inner display fixture kit includes the cover layer squeegee and the inner display fixture base, roller, and support bar.
5 Ethanol wipes must contain at least 90% ethanol and no additives except isopropyl alcohol.
6 Refer to Heated Display Removal Fixture Operating Manual. If you purchased a new heated display removal fixture, refer to the unboxing instructions.
7 Clean, dry, untreated sand (8–10 cups)
8 Sand container (wide-mouthed, quick pour, nonbreakable plastic container with a flip-top lid)
9 The black torque driver kit includes a black torque driver (0.35 kgf cm), pentalobe PL1.1 44 mm half-moon bit (923-0247), and crosshead 44 mm half-moon bit (923-0246). The bits are also available separately.