iPhone 18 Pro Screws
This section shows the screw diagrams, screws, and torque drivers for iPhone 18 Pro.
Warning
Never reinstall a screw after it has been removed. Install only new screws. iPhone screws are covered with an adhesive that can’t be reused. Discard screws according to your local recycling guidelines.
Use only the torque driver indicated to install new screws during reassembly. Both overtightened screws and loose screws can damage parts.
Screw trays
A screw tray is included with a replacement part and includes new screws needed to complete a repair.
A screw tray uses a grid format to easily identify the correct screw needed for a repair step. For example, A1 = 923-15881 and A2 = 923-15882.
The location of each screw will be the same across all screw trays. Only the screws needed to complete the repair for the replacement part ordered are included in a screw tray.
The diagram below shows the location of all screws. The following table includes the part number, torque driver type, bit type, torque value, and the corresponding procedure for each screw.
Location | Part number | Screw bit type | Torque driver | Torque value | Procedure |
|---|---|---|---|---|---|
A1 | 923-15881 | Crosshead | Green | 0.45 kgf cm | Display |
A2 | 923-15882 | Crosshead | Green | 0.45 kgf cm | Display |
A3 | 923-15881 | Crosshead | Black | 0.35 kgf cm | Back glass |
F1 | 923-15887 | Torx Plus 4IP | Adjustable | 17.5 Ncm | Battery |
B1 | 923-15888 | Torx Plus 4IP | Adjustable | 17.5 Ncm | Battery |
B2 | 923-15888 | Torx Plus 4IP | Adjustable | 17.5 Ncm | Battery |
B3 | 923-15884 | Torx Plus 4IP | Adjustable | 32.5 Ncm | Battery |
B4 | 923-15884 | Torx Plus 4IP | Adjustable | 32.5 Ncm | Battery |
B5 | 923-15884 | Torx Plus 4IP | Adjustable | 32.5 Ncm | Battery |
B6 | 923-15884 | Torx Plus 4IP | Adjustable | 32.5 Ncm | Battery |
C1 | 923-15884 | Torx Plus 4IP | Adjustable | 32.5 Ncm | Battery |
C2 | 923-15884 | Torx Plus 4IP | Adjustable | 32.5 Ncm | Battery |
C3 | 923-15884 | Torx Plus 4IP | Adjustable | 32.5 Ncm | Battery |
C4 | 923-15884 | Torx Plus 4IP | Adjustable | 32.5 Ncm | Battery |
C5 | 923-15884 | Torx Plus 4IP | Adjustable | 32.5 Ncm | Battery |
C6 | 923-15884 | Torx Plus 4IP | Adjustable | 32.5 Ncm | Battery |
F2 | 923-15912 | Torx Plus 4IP | Adjustable | 28 Ncm | Camera |
F3 | 923-15913 | Torx Plus 4IP | Adjustable | 28 Ncm | Camera |
F4 | 923-15914 | Torx Plus 4IP | Adjustable | 28 Ncm | Camera |
E1 | 923-15920 | Crosshead | Adjustable | 14.5 Ncm | Top speaker |
E2 | 923-15921 | Crosshead | Adjustable | 14.5 Ncm | Top speaker |
E3 | 923-15921 | Crosshead | Adjustable | 14.5 Ncm | Top speaker |
H1 | 923-15894 | Crosshead | Blue | 0.65 kgf cm | Bottom speaker |
H2 | 923-15895 | Crosshead | Adjustable | 14.5 Ncm | Bottom speaker |
H3 | 923-15895 | Crosshead | Adjustable | 14.5 Ncm | Bottom speaker |
H4 | 923-15896 | Crosshead | Teal | 0.75 kgf cm | Bottom speaker |
H5 | 923-15897 | Crosshead | Adjustable | 11.5 Ncm | Bottom speaker |
H6 | 923-15897 | Crosshead | Adjustable | 11.5 Ncm | Bottom speaker |
J1 | 923-15898 | Crosshead | Gray | 0.55 kgf cm | Bottom speaker |
E4 | 923-15900 | Crosshead | Orange | 0.85 kgf cm | Bottom speaker (pSIM) |
E5 | 923-15911 | Crosshead | Blue | 0.65 kgf cm | Bottom speaker (pSIM) |
E6 | 923-15895 | Crosshead | Adjustable | 14.5 Ncm | Bottom speaker (pSIM) |
J2 | 923-15862 | Crosshead | Adjustable | 13 Ncm | Taptic Engine |
F5 | 923-15863 | Super screw | Adjustable | 14.5 Ncm | Taptic Engine |
J3 | 923-15864 | Crosshead | Adjustable | 13 Ncm | Taptic Engine |
J4 | 923-15865 | Crosshead | Teal | 0.75 kgf cm | Taptic Engine |
J5 | 923-15865 | Crosshead | Teal | 0.75 kgf cm | Taptic Engine |
J6 | 923-15865 | Crosshead | Teal | 0.75 kgf cm | Taptic Engine |
K1 | 923-15918 | Super screw | Orange | 0.85 kgf cm | Main microphone |
K2 | 923-15919 | Crosshead | Blue | 0.65 kgf cm | Main microphone |
M1 | 923-15907 | Trilobe | Green | 0.45 kgf cm | Logic board |
M2 | 923-15907 | Trilobe | Green | 0.45 kgf cm | Logic board |
M3 | 923-15881 | Crosshead | Black | 0.35 kgf cm | Logic board |
M4 | 923-15908 | Trilobe | Black | 0.35 kgf cm | Logic board (mmWave antenna) |
Location | Part number | Screw bit type | Torque driver | Torque value | Procedure |
|---|---|---|---|---|---|
K3 | 923-15900 | Crosshead | Orange | 0.85 kgf cm | USB-C connector |
K4 | 923-15900 | Crosshead | Orange | 0.85 kgf cm | USB-C connector |
K5 | 923-15896 | Crosshead | Teal | 0.75 kgf cm | USB-C connector |
K6 | 923-15901 | Crosshead | Blue | 0.65 kgf cm | USB-C connector |
L1 | 923-15901 | Crosshead | Blue | 0.65 kgf cm | USB-C connector |
L2 | 923-15902 | Crosshead | Teal | 0.75 kgf cm | USB-C connector |
L3 | 923-15902 | Crosshead | Teal | 0.75 kgf cm | USB-C connector |
L4 | 923-15903 | Crosshead | Blue | 0.65 kgf cm | USB-C connector |
Screw tray diagrams
Refer to the screw tray diagrams below to identify which screws are included with a replacement part.
Display  | Back glass  | Battery  |
Camera  | Front camera  | Top speaker  |
Bottom speaker (eSIM)  | Bottom speaker (pSIM)  | Taptic Engine (eSIM)  |
Taptic Engine (pSIM)  | Main microphone (eSIM)  | Main microphone (pSIM)  |
Logic board (mmWave)  | Logic board (without mmWave)  | Enclosure (eSIM)  |
Enclosure (pSIM)  |
USB-C connector (eSIM)  | USB-C connector (pSIM)  |
Screw location diagrams
Screw location diagrams show where new screws should be installed and include the part number, torque value, and screw bit type for each screw. Screw location diagrams are also included in the reassembly section of repair procedures.
Display  | Back glass  | Battery  |
Camera  | Front camera — | Top speaker  |
Bottom speaker (eSIM)  | Bottom speaker (pSIM)  | Taptic Engine (eSIM)  |
Taptic Engine (pSIM)  | Main microphone (eSIM)  | Main microphone (pSIM)  |
Logic board (mmWave)  | Logic board (without mmWave)  | Enclosure (eSIM) — |
Enclosure (pSIM) — |
USB-C connector (eSIM)  | USB-C connector (pSIM)  |
Screw types
 | Crosshead screw |
 | Pentalobe screw |
 | Super screw1 |
 | Top screw with screw underneath |
 | Torx Plus screw |
 | Trilobe screw |
1A super screw has a threaded hole that holds another screw.
Torque drivers
Note: You can use any torque driver to remove screws.
 | Use the black torque driver (0.35 kgf cm) for screws outlined in black. |
 | Use the green torque driver (0.45 kgf cm) for screws outlined in green. |
 | Use the gray torque driver (0.55 kgf cm) for screws outlined in gray. |
 | Use the blue torque driver (0.65 kgf cm) for screws outlined in blue. |
 | Use the teal torque driver (0.75 kgf cm) for screws outlined in teal. |
 | Use the orange torque driver (0.85 kgf cm) for screws outlined in orange. |
 | Use the adjustable torque driver (10–34 Ncm) for screws outlined in black/green. |