Upgrade or install memory in your Mac mini

Learn how to remove or install memory into your Mac mini computer.

Before you begin

To minimize the possibility of damage to the computer components due to static discharge, it's important to wear an antistatic wrist strap while you work with your computer's memory.


Choose your model

Mac mini models have different memory (RAM) installation requirements. Choose your Mac mini model for more information. If you need help determining which Mac mini you have, find out how to identify Mac mini models.
 

2023, 2020

Memory is integrated into the Apple M-series chip package in Mac mini (2023) and Mac mini (M1, 2020) and can't be upgraded. You can configure the memory in your Mac mini when you purchase it.

2018

Mac mini (2018) does not have user-installable RAM. You can configure the memory in your Mac mini (2018) when you purchase it. To upgrade the memory in your Mac mini (2018), go to an Apple Store or Apple Authorized Service Provider.

RAM availability varies by country and region.

2014

Mac mini (Late 2014) has memory that is integrated into the main logic board and can't be upgraded.

2012, 2011, 2010

To remove and install memory in your Mac mini (Late 2012)Mac mini (Mid 2011), or Mac mini (Mid 2010), use the following steps.

Remove the bottom cover

  1. Turn off your Mac mini. From the Apple menu (), choose Shut Down.
  2. Disconnect the power cord and all other cables from your Mac mini.
  3. Lay your Mac mini upside down on a soft cloth or towel, and then rotate the bottom cover counterclockwise to the unlocked position.

    Two hands rotating the bottom cover of Mac mini
  4. Press on the cover to pop up the opposite side, and then remove the cover.

    1 hand pressing the top side of the bottom cover to open it

Remove the original memory modules

  1. Gently spread the clips at the ends of the top memory module just enough to let the free edge pop up.

    Two hands spreading the retainer clips to loosen a memory module
  2. Pull the module out of the slot.

    Memory module tilted upwards to be removed from the Mac mini
  3. Repeat to remove the second, bottom module.

Install the new memory

  1. Carefully press the notched edge of the new memory module into the bottom slot while keeping the opposite edge slightly raised.
    New memory module being inserted into ram slot
  2. Press down on the raised edge until the clips snap into place.
    Memory module locked in place in ram slot
  3. Repeat to install the top memory module.

Replace the bottom cover

Don't connect the power cord or turn on your Mac mini until you replace the bottom cover. Never operate your Mac mini without the cover in place.

  1. Replace the bottom cover using the alignment dots to place it in the unlocked position.
    Underside of Mac mini showing bottom cover in unlocked position
  2. Rotate the cover clockwise to lock it in place.
    Underside of Mac mini showing bottom cover in locked position
  3. Reconnect the power cord and any other cables you disconnected.

After you install the memory, confirm that your Mac mini sees the new memory.

Confirm that your Mac sees the new memory

To check that the computer recognizes the new memory:

  1. Start up your computer.
  2. When you see your desktop, choose Apple menu , then choose About This Mac.
  3. Confirm that the memory listed matches the memory you installed.

If the reported memory size isn't correct or if your Mac mini repeatedly plays three tones, it may be having trouble recognizing a memory module. If this happens, shut down your Mac mini, verify the module specifications against the requirements for your Mac mini model, and then repeat the memory installation instructions to make sure that the modules are installed correctly. If you still have issues, remove the memory and consult the support information that came with the memory, or contact the vendor who provided the memory.

Published Date: