Languages

AirPort: Can Connect to Base Station But Not to Internet When Using PPPoE

Symptoms

Your computer may connect to the base station but not to the Internet or local network when using a PPPoE DSL or cable modem service.

  • Your computer connects to the base station with a strong signal, but it cannot connect to the Internet or your local network.
  • The Network preference pane may show an IP address of 10.64.64.64 for the Built-in Ethernet port.

This typically occurs after adding an AirPort Base Station or third-party wireless access point where wired Ethernet was previously used to connect to a PPPoE DSL or cable modem service. In this scenario, the base station should be the only device connecting via PPPoE to the modem. The wireless connection from client to base station is not PPPoE. When you see these symptoms, the client computer is continuing its attempt to connect over the Built-in Ethernet port via PPPoE, despite the fact that no Ethernet cable is connected.

Resolution

1. Choose Apple menu > System Preferences.
2. Choose View > Network.
3. Choose Built-in Ethernet from the Show pop-up menu.
4. Click the PPPoE tab.
5. Click the PPPoE Options button.
6. Deselect the "Connect automatically when needed" option.
7. Click OK.
8. Click Apply Now.

Last Modified: Jul 25, 2008
Helpful?
Yes
No
Not helpful Somewhat helpful Helpful Very helpful Solved my problem
Print this page
  • Last Modified: Jul 25, 2008
  • Article: TS1850
  • Views:

    245108
  • Rating:
    • 56.0

    (1206 Responses)

Additional Product Support Information

Start a Discussion
in Apple Support Communities
See all questions on this article See all questions I have asked