Languages

Final Cut Pro 7: Troubleshooting Basics

Symptoms

If Final Cut Pro 7.x isn't performing as expected, try these basic troubleshooting steps to attempt to isolate and resolve the issue. Please note that these steps are not intended to address a specific issue and are not comprehensive.

Resolution

Confirm requirements and versions

  1. Check system requirements
    Make sure that you haven't overlooked any hardware aspect that's required to use Final Cut Pro. You can view the system requirements on the Final Cut Pro 7 Technical Specifications page.
  2. Update to the latest software versions
    Choose Apple > Software Update and make sure that you have the most recent updates for your versions of Final Cut Pro, QuickTime, and other important system files. Installing the latest updates ensures that your software has the latest improvements and enhancements.
  3. Check compatibility and driver versions for third-party devices
    If you're using a third-party capture card, storage system, input device, or something else, check the support area on the manufacturer's website to be sure that you're using the latest version of the relevant driver or other software for your device. To see if your video device has been qualified for use with Final Cut Pro 7, view the Final Cut Pro 7.0.3: Supported cameras.

Delete the User Preferences

You can resolve many issues by restoring Final Cut Pro 7 back to its original settings. This will not impact your project files, but you should verify your Scratch Disk location setting after doing this. To reset your Final Cut Pro 7 user preferences to their original state, do the following:

  1. In the Finder, go to ~/Library/Preferences—the tilde (~) represents your Home folder.
  2. Remove the "com.apple.finalcutpro.plist" file from the Preferences folder.
  3. Remove the "Final Cut Pro User Data" folder from the Preferences folder.

Remove receipts and reinstall Final Cut Pro

Another approach you might consider is reinstalling Final Cut Pro 7. To do this effectively, you need to remove the application and its receipts, then install Final Cut Pro 7 and use Software Update to install additional updates. You don't have to remove everything that was installed with Final Cut Pro 7. Follow the steps below to completely reinstall a fresh copy of Final Cut Pro 7.

Note: Make sure that you have your installation discs and serial number handy before starting this.

  1. Open the Applications folder.
  2. Drag the Final Cut Pro application to the Trash.
  3. Go to /Library/Receipts.
  4. In the Receipts folder, select the "FinalCutPro.pkg" file.
  5. Choose View > as List to view the contents in a list.
  6. Click the Date Modified column header so you can easily see all of the receipts that were installed at the same time as Final Cut Pro.
  7. Drag the FinalCutPro.pkg receipt to the Trash, as well as any other items that have the same modification date within 3 minutes of the FinalCutPro.pkg's modification date.
  8. Click the Name column header to sort the list alphabetically.
  9. Drag any other receipts whose names begin with "Final Cut Pro" to the Trash.
  10. Insert your installation disc and install Final Cut Pro.
  11. When finished, use Software Update (under the Apple menu) to update your software to the latest version.
Important: Information about products not manufactured by Apple is provided for information purposes only and does not constitute Apple’s recommendation or endorsement. Please contact the vendor for additional information.
Last Modified: Mar 22, 2012
Helpful?
Yes
No
  • Last Modified: Mar 22, 2012
  • Article: TS1846
  • Views:

    17983
  • Rating:
    • 100.0

    (1 Responses)

Additional Product Support Information

Start a Discussion
in Apple Support Communities
See all questions on this article See all questions I have asked