Promise VTrak: Correct shutdown and startup of RAID Controllers and SAS-connected Expansion Chassis
Symptoms
It is important for any SAS-connected Expansion Chassis to be fully booted before booting the RAID Controller.
Products Affected
Promise VTrak
Resolution
Correct shutdown order:
- Shutdown RAID Controller
- Shutdown SAS-connected Expansion Chassis
Correct boot order:
- Boot SAS-connected Expansion Chassis
- Boot RAID Controller
Not following this above boot order may result in drives being reported as "Dead" or Offline, even though the drives are actually operative. To resolve this issue, follow the steps described in this article.
Important: Information about products not manufactured by Apple is provided for information purposes only and does not constitute Apple's recommendation or endorsement. Please contact the vendor for additional information.
Rate this article: