ARCHIVE

Power Mac G4 Cube: How to Connect a Projector or Monitor

  • Last Modified: September 17, 2003
  • Article: TA26383
  • Old Article: 60719
This article has been archived and is no longer updated by Apple.
This article explains how to connect a projector or monitor with a VGA connector to a Power Mac G4 Cube computer.

Products Affected

Power Mac

If your projector or monitor has a VGA connector, connect the VGA-to-VGA adapter that came with your computer to the VGA port and then connect your monitor cable to the adapter.



A. VGA monitor port on a Power Mac G4 Cube computer

Figure 1 Connecting the VGA-to-VGA adapter

To connect a projector or monitor to the VGA-to-VGA adapter:

    1. Plug the VGA adapter into the VGA monitor port and tighten the thumbscrews.
    2. Plug the project or monitor cable into this end of the adapter and tighten the thumbscrews.
Not helpful Somewhat helpful Helpful Very helpful Solved my problem