Promise VTrak: RAID Controllers and SAS-connected Expansion Chassis: Xsan (Metadata, Journal and Data)

To create the configuration script, copy the text below beginning with the line "#Begin Copy" to the line "#End Copy" and paste the text into TextEdit, using these guidelines. Once you've created the script, follow the guidelines in this article to import the configuration script. 

#
# Promise VTrak E-Class configuration script
#
# Script Name: RAID Controllers and SAS-connected Expansion Chassis: Xsan (Metadata, Journal and Data)
#
#
# Script Details: builds 6 LUNs from 32 drives (head + expansion unit)
# in the recommended configuration for use with Xsan 2
#
# Script Assumptions: no arrays or logical drives created
# (uncomment out array deletion if needed)
# script works with either SATA or SAS configurations
#
# Global controller settings
# LUN Affinity: enabled [required]
# Adaptive Writeback Cache: enabled [optional]
# Host Cache Flushing: disabled [optional]
# Forced Read Ahead: enabled [optional]
#
ctrl -a mod -i 1 -s "lunaffinity=enable, adaptivewbcache=enable, hostcacheflushing=disable, forcedreadahead=enable"
ctrl -a mod -i 2 -s "lunaffinity=enable, adaptivewbcache=enable, hostcacheflushing=disable, forcedreadahead=enable"
#
# Delete any existing arrays
# Delete array 0 thru 5
#
#array -a del -d 0
#array -a del -d 1
#array -a del -d 2
#array -a del -d 3
#array -a del -d 4
#array -a del -d 5
#
# Build MDC LUN
# RAID level: 1
# Physical Drives: 1, 2
# Alias: MetadataLUN
# Controller Affinity: 1
# Configuration options: Capacity all (default), 64K stripe size (default),
# 512 byte sector (default), Read Cache, Write Back
#
array -a add -p 1,2 -s "alias=MetadataLUN" -c 1 -l "alias=MetadataLUN, raid=1, readpolicy=readcache, writepolicy=writeback, preferredctrlid=1"
#
#
# Build Journal LUN
# RAID level: 1
# Physical Drives: 29, 30
# Alias: JournalLUN
# Controller Affinity: 2
# Configuration options: Capacity all (default), 64K stripe size (default),
# 512 byte sector (default), Read Cache, Write Back
#
array -a add -p 29,30 -s "alias=JournalLUN" -c 1 -l "alias=JournalLUN, raid=1, readpolicy=readcache, writepolicy=writeback, preferredctrlid=2"
#
# Build Data1 LUN
# RAID level: 5
# Physical Drives: 5, 6, 9, 10, 13, 14
# Alias: Data1
# Controller Affinity: 1
# Configuration options: Capacity all (default), 64K stripe size (default),
# 512 byte sector (default), Read Ahead, Write Back
#
array -a add -p 5,6,9,10,13,14 -s "alias=Data1" -c 1 -l "alias=Data1, raid=5, readpolicy=readahead, writepolicy=writeback, preferredctrlid=1"
#
# Build Data2 LUN
# RAID level: 5
# Physical Drives: 7, 8, 11, 12, 15, 16
# Alias: Data2
# Controller Affinity: 2
# Configuration options: Capacity all (default), 64K stripe size (default),
# 512 byte sector (default), Read Ahead, Write Back
#
array -a add -p 7,8,11,12,15,16 -s "alias=Data2" -c 1 -l "alias=Data2, raid=5, readpolicy=readahead, writepolicy=writeback, preferredctrlid=2"
#
# Build Data3 LUN
# RAID level: 5
# Physical Drives: 17, 18, 21, 22, 25, 26
# Alias: Data3
# Controller Affinity: 1
# Configuration options: Capacity all (default), 64K stripe size (default),
# 512 byte sector (default), Read Ahead, Write Back
#
array -a add -p 17,18,21,22,25,26 -s "alias=Data3" -c 1 -l "alias=Data3, raid=5, readpolicy=readahead, writepolicy=writeback, preferredctrlid=1"
#
# Build Data4 LUN
# RAID level: 5
# Physical Drives: 19, 20, 23, 24, 27, 28
# Alias: Data4
# Controller Affinity: 2
# Configuration options: Capacity all (default), 64K stripe size (default),
# 512 byte sector (default), Read Ahead, Write Back
#
array -a add -p 19,20,23,24,27,28 -s "alias=Data4" -c 1 -l "alias=Data4, raid=5, readpolicy=readahead, writepolicy=writeback, preferredctrlid=2"
#

# Set up global spares
# Physical Drives: 3, 4, 31, 32
# Type: Global spares, Revertible
#
spare -a add -p 3 -t g -r y
spare -a add -p 4 -t g -r y
spare -a add -p 31 -t g -r y
spare -a add -p 32 -t g -r y
#
# Perform Quick Init on all LUNs
# Note: Ensure any stale filesystem data is destroyed
#
init -a start -l 0 -q 100
init -a start -l 1 -q 100
init -a start -l 2 -q 100
init -a start -l 3 -q 100
init -a start -l 4 -q 100
init -a start -l 5 -q 100
#
# END
#