Promise VTrak: RAID Controllers - Direct Attached configuration script
Summary
This article contains a script used to configure Promise RAID Controllers for Direct Attached Storage.
To create the configuration script, copy the text below beginning with the line "#Begin Copy" to the line "#End Copy" and paste the text into TextEdit, using these guidelines.
Once you've created the script, follow the guidelines in this article to import the configuration script.
Products Affected
Xsan, Promise VTrak
#Begin Copy # # Promise VTrak E-Class configuration script # # Script Name: RAID Controllers: Direct Attached # Script Version: 2.0 (02/22/08) # # # Script Details: builds 2 RAID 5 LUNs from 16 drives (head unit only) # for direct attached usage # # Script Assumptions: no arrays or logical drives created # (uncomment out array deletion if needed) # script works with either SATA or SAS configurations # # # Global controller settings # LUN Affinity: enabled [required] # Adaptive Writeback Cache: enabled [optional] # Host Cache Flushing: disabled [optional] # Forced Read Ahead: enabled [optional] # ctrl -a mod -i 1 -s "lunaffinity=enable, adaptivewbcache=enable, hostcacheflushing=disable, forcedreadahead=enable" ctrl -a mod -i 2 -s "lunaffinity=enable, adaptivewbcache=enable, hostcacheflushing=disable, forcedreadahead=enable" # # Delete any existing arrays # Delete array 0 thru 1 # Note: uncomment out delete array commands to delete any existing LUNs; # all physical drives must be available for script to run # successfully # #array -a del -d 0 #array -a del -d 1 # # Build Data1 LUN # RAID level: 5 # Physical Drives: 1, 2, 5, 6, 9, 10, 13, 14 # Alias: Data1 # Controller Affinity: 1 # Configuration options: Capacity all (default), 64K stripe size (default), # 512K sector (default), Read Ahead, Write Through # array -a add -p 1,2,5,6,9,10,13,14 -s "alias=Data1" -c 1 -l "alias=Data1,raid=5,readpolicy=readahead,writepolicy=writeback,preferredctrlid=1" # # Build Data2 LUN # RAID level: 5 # Physical Drives: 3, 4, 7, 8, 11, 12, 15, 16 # Alias: Data2 # Controller Affinity: 2 # Configuration options: Capacity all (default), 64K stripe size (default), # 512K sector (default), Read Ahead, Write Through # array -a add -p 3,4,7,8,11,12,15,16 -s "alias=Data2" -c 1 -l "alias=Data2,raid=5,readpolicy=readahead,writepolicy=writeback,preferredctrlid=2" # # Set up global spares # Physical Drives: # Type: Global spares, Revertible # Note: This configuration does not have any spares # # # Perform Quick Init on all LUNs # Note: Ensure any stale filesystem data is destroyed # init -a start -l 0 -q 100 init -a start -l 1 -q 100 # # END # #End Copy
Important: Information about products not manufactured by Apple is provided for information purposes only and does not constitute Apple’s recommendation or endorsement. Please contact the vendor for additional information.
Rate this article: