Languages

Archived - Promise VTrak: RAID Controllers - Xsan (Data Only) configuration script

This article contains a script used to configure Promise VTrak RAID Controllers for Xsan (Data Only).

This article has been archived and is no longer updated by Apple.

To create the configuration script, copy the text below beginning with the line "#Begin Copy" to the line "#End Copy" and paste the text into TextEdit, using these guidelines. Once you've created the script, follow the guidelines in this article to import the configuration script.


#Begin Copy
#
# Promise VTrak E-Class configuration script
#
# Script Name: RAID Controllers: Xsan (Data Only)
#
#
# Script Details: builds 3 LUNs from 16 drives (head unit)
# in the recommended configuration for use with Xsan 2
#
# Script Assumptions: no arrays or logical drives created
# (uncomment out array deletion if needed)
# script works with either SATA or SAS configurations
#
# Global controller settings
# LUN Affinity: enabled [required]
# Adaptive Writeback Cache: enabled [optional]
# Host Cache Flushing: disabled [optional]
# Forced Read Ahead: enabled [optional]
#
ctrl -a mod -i 1 -s "lunaffinity=enable, adaptivewbcache=enable, hostcacheflushing=disable, forcedreadahead=enable"
ctrl -a mod -i 2 -s "lunaffinity=enable, adaptivewbcache=enable, hostcacheflushing=disable, forcedreadahead=enable"
#
# Delete any existing arrays
# Delete array 0 thru 2
#
#array -a del -d 0
#array -a del -d 1
#array -a del -d 2
#
# Build Data1 LUN
# RAID level: 5
# Physical Drives: 1, 2, 5, 6, 9, 10
# Alias: Data1
# Controller Affinity: 1
# Configuration options: Capacity all (default), 64K stripe size (default),
# 512 byte sector (default), Read Ahead, Write Back
#
array -a add -p 1,2,5,6,9,10 -s "alias=Data1" -c 1 -l "alias=Data1, raid=5, readpolicy=readahead, writepolicy=writeback, preferredctrlid=1"
#
# Build Data2 LUN
# RAID level: 5
# Physical Drives: 3, 4, 7, 8, 11, 12
# Alias: Data2
# Controller Affinity: 2
# Configuration options: Capacity all (default), 64K stripe size (default),
# 512 byte sector (default), Read Ahead, Write Back
#
array -a add -p 3,4,7,8,11,12 -s "alias=Data2" -c 1 -l "alias=Data2, raid=5, readpolicy=readahead, writepolicy=writeback, preferredctrlid=2"
#
# Build Scratch1 LUN
# RAID level: 5
# Physical Drives: 13, 14, 15
# Alias: Scratch1
# Controller Affinity: 1
# Configuration options: Capacity all (default), 64K stripe size (default),
# 512 byte sector (default), Read Ahead, Write Back
#
array -a add -p 13,14,15 -s "alias=Scratch1" -c 1 -l "alias=Scratch1, raid=5, readpolicy=readahead, writepolicy=writeback, preferredctrlid=1"
#
# Set up global spares
# Physical Drives: 16
# Type: Global spares, Revertible
#
spare -a add -p 16 -t g -r y
#
# Perform Quick Init on all LUNs
# Note: Ensure any stale filesystem data is destroyed
#
init -a start -l 0 -q 100
init -a start -l 1 -q 100
init -a start -l 2 -q 100
#
# END
#
#End Copy

Important: Information about products not manufactured by Apple is provided for information purposes only and does not constitute Apple’s recommendation or endorsement. Please contact the vendor for additional information.
Last Modified: May 17, 2013
Helpful?
Yes
No
  • Last Modified: May 17, 2013
  • Article: HT1161
  • Views:

    572
  • Rating:
    • 100.0

    (1 Responses)

Additional Product Support Information

Start a Discussion
in Apple Support Communities
See all questions on this article See all questions I have asked