Promise VTrak: RAID Controllers - Xsan (Data Only) configuration script
Summary
This article contains a script used to configure Promise VTrak RAID Controllers for Xsan (Data Only). To create the configuration script, copy the text below beginning with the line "#Begin Copy" to the line "#End Copy" and paste the text into TextEdit, using these guidelines.
Once you've created the script, follow the guidelines in this article to import the configuration script.
Products Affected
Xsan, Promise VTrak
#Begin Copy
#
# Promise VTrak E-Class configuration script
#
# Script Name: RAID Controllers: Xsan (Data Only)
# Script Version: 2.0 (02/22/08)
#
#
# Script Details: builds 3 LUNs from 16 drives (head unit)
# in the recommended configuration for use with Xsan 2
#
# Script Assumptions: no arrays or logical drives created
# (uncomment out array deletion if needed)
# script works with either SATA or SAS configurations
#
# Global controller settings
# LUN Affinity: enabled [required]
# Adaptive Writeback Cache: enabled [optional]
# Host Cache Flushing: disabled [optional]
# Forced Read Ahead: enabled [optional]
#
ctrl -a mod -i 1 -s "lunaffinity=enable, adaptivewbcache=enable, hostcacheflushing=disable, forcedreadahead=enable"
ctrl -a mod -i 2 -s "lunaffinity=enable, adaptivewbcache=enable, hostcacheflushing=disable, forcedreadahead=enable"
#
# Delete any existing arrays
# Delete array 0 thru 2
#
#array -a del -d 0
#array -a del -d 1
#array -a del -d 2
#
# Build Data1 LUN
# RAID level: 5
# Physical Drives: 1, 2, 5, 6, 9, 10
# Alias: Data1
# Controller Affinity: 1
# Configuration options: Capacity all (default), 64K stripe size (default),
# 512K sector (default), Read Ahead, Write Back
#
array -a add -p 1,2,5,6,9,10 -s "alias=Data1" -c 1 -l "alias=Data1,raid=5,readpolicy=readahead,writepolicy=writeback,preferredctrlid=1"
#
# Build Data2 LUN
# RAID level: 5
# Physical Drives: 3, 4, 7, 8, 11, 12
# Alias: Data2
# Controller Affinity: 2
# Configuration options: Capacity all (default), 64K stripe size (default),
# 512K sector (default), Read Ahead, Write Back
#
array -a add -p 3,4,7,8,11,12 -s "alias=Data2" -c 1 -l "alias=Data2,raid=5,readpolicy=readahead,writepolicy=writeback,preferredctrlid=2"
#
# Build Scratch1 LUN
# RAID level: 5
# Physical Drives: 13, 14, 15
# Alias: Scratch1
# Controller Affinity: 1
# Configuration options: Capacity all (default), 64K stripe size (default),
# 512K sector (default), Read Ahead, Write Back
#
array -a add -p 13,14,15 -s "alias=Scratch1" -c 1 -l "alias=Scratch1,raid=5,readpolicy=readahead,writepolicy=writeback,preferredctrlid=1"
#
# Set up global spares
# Physical Drives: 16
# Type: Global spares, Revertible
#
spare -a add -p 16 -t g -r y
#
# Perform Quick Init on all LUNs
# Note: Ensure any stae filesystem data is destroyed
#
init -a start -l 0 -q 100
init -a start -l 1 -q 100
init -a start -l 2 -q 100
#
# END
#
#End Copy
Important: Information about products not manufactured by Apple is provided for information purposes only and does not constitute Apple’s recommendation or endorsement. Please contact the vendor for additional information.